Products
-
Clean FCL30 Portable Residual Chlorine Test Instrument
1. Use the three electrode principles to measure the residual chlorine concentration, which is accurate and fast, and can be compared with the DPD method;
2. No need for consumables, simple maintenance, and the measurement value is not affected by low temperature or turbidity;
3. You can replace the CS5930 dilin chlorine electrode by yourself, which is easy to clean and maintain. -
Laboratory products support custom laboratory various instruments and equipment
Supply of various laboratory instruments, funnel, tube, measuring cup, measuring tube , trapezoidal brackets, pipette frames, pipettes, capacity bottle test strips, electronic table scale, horse boiling furnace, resistor furnace, etc. Support customization, you can customize the laboratory.
-
Flow Meter Portable Open Channel Flow Meter
◆The working principle of the open channel weir and groove flowmeter is to set a standard water weir groove in the open channel, so that the flow rate of the water flowing through the weir groove is in a single value relationship with the water level, and the water level is measured according to the specified position, and calculated by the corresponding formula flow.
◆According to the principle, the accuracy of the water flow measured by the flow meter, in addition to the need for a standardized water weir tank on site, the flow rate is only related to the water level height.
◆The accuracy of the water level is the key to the flow detection.
◆We use The liquid level gauge is a high-quality ultrasonic open channel level gauge. This level gauge can meet the needs of on-site measurement in terms of data accuracy and product anti-interference and corrosion resistance. -
Wind Direction Sensor Weather Instrument
WDZ Wind direction sensors (transmitters) adopts high precision magnetic sensitive chip inside , also adopts wind vane with low inertia and light metal to response the wind direction and have good dynamic characteristics. The product have many advances such as great range、good linear、strong anti-lighting、easy to observe、stable and reliable. It can be widely used in meteorology, marine, environment, airport, harbor, laboratory, industry and agriculture area.
-
Ambient Dust Monitoring System
◆The noise and dust monitoring system allows for continuous automatic monitoring.
◆Data can be automatically monitored and transmitted unattended.
◆It can monitor f dust, PM2.5, PM10, PM1.0, TSP, noise and air temperature and humidity, wind speed, wind direction and other environmental factors, as well as the detection data of each detection point is directly uploaded to the monitoring background through wireless communication.
◆It is mainly used for urban functional area monitoring, industrial enterprise boundary monitoring, and construction site boundary monitoring. -
Indoor temperature and humidity sensor
This product uses the 485 MODBUS transmission principle to display, contains a highly integrated temperature and humidity sensor chip, which can measure the temperature and humidity of the scene in time, and an external LCD screen, real-time display of real-time temperature and humidity data in the area. There is no need to display real-time data measured by the sensor through a computer or other devices, unlike previous sensors.
The status indicator on the upper left side is on, and the temperature is displayed at this time;
The status indicator on the lower left side is on, and the humidity is displayed at this time.
-
PC-5GF Photovoltaic Environment Monitor
PC-5GF The photovoltaic environmental monitor is an environmental monitor with a metal explosion-proof casing that is easy to install, has high measurement accuracy, stable performance, and integrates multiple meteorological elements. This product is developed according to the needs of solar energy resource assessment and solar energy system monitoring, combined with the advanced technology of solar energy observation system at home and abroad.
In addition to monitoring the basic elements of the environment such as ambient temperature, ambient humidity, wind speed, wind direction, and air pressure, this product can also monitor the necessary solar radiation (horizontal/inclined plane) and component temperature in the photovoltaic power station environmental system. In particular, a highly stable solar radiation sensor is used, which has perfect cosine characteristics, fast response, zero drift and wide temperature response. It is very suitable for radiation monitoring in the solar industry. The two pyranometers can be rotated at any angle. It meets the optical power budget requirements of the photovoltaic industry and is currently the most suitable leading-level portable photovoltaic environment monitor for use in photovoltaic power plants.
-
Three Temperature and Three Humidity Soil Moisture Recorder
Main controller technical parameters
. Recording capacity: >30000 groups
. Recording interval: 1 hour – 24 hours adjustable
. Communication interface: local 485 to USB 2.0 and GPRS wireless
. Working environment: -20℃–80℃
. Working voltage: 12V DC
. Power supply: battery powered -
Portable Handheld Weather Station
◆ Convenient to carry, easy to operate
◆ Integrates five meteorological elements:wind speed, speed direction, air temperature, air humidity, air pressure.
◆ The built-in large-capacity FLASH memory chip can store meteorological data for at least one year.
◆ Universal USB communication interface.
◆ Support custom parameters. -
Portable compound gas detector
Thanks for using our portable compound gas detector. Reading this manual will make you quickly master the function and usage of this product. Please read this manual carefully before operating.
Num: Number
Para: Parameter
Cal: Calibration
ALA1: Alarm1
ALA2: Alarm2
-
Portable combustible gas leak detector
Portable combustible gas leak detector adopts ABS material, ergonomic design, easy to operate, using large screen dot matrix LCD display. The sensor uses the catalytic combustion type which is anti-interference capability, the detector is with a Long and flexible stainless goose neck detect probe and used to detect gas leak in the restricted space, when the gas concentration exceed a preset alarm level, it will make audible, vibration alarm. It is usually used in detecting gas leakage from the gas pipelines, gas valve, and other possible places, tunnel, municipal engineering, chemical industry, metallurgy, etc.
-
Portable Multiparameter Transmitter
1. One machine is multi-purpose, which can be expanded to use various types of sensors;
2. Plug and play, automatically identify electrodes and parameters, and automatically switch the operation interface;
3. The measurement is accurate, the digital signal replaces the analog signal, and there is no interference;
4. Comfortable operation and ergonomic design;
5. Clear interface and high-resolution LCM design;
6. Easy to operate, with Chinese and English menus.nt is accurate, the digital signal replaces the analog signal, and there is no interference.
