Three Temperature and Three Humidity Soil Moisture Recorder
1. Introduction
The soil moisture sensor is a high-precision, high-sensitivity sensor that measures soil temperature. Its working principle is that measuring soil moisture through FDR (frequency domain method) can correspond to soil volumetric moisture content, which is a soil moisture measurement method that conforms to current international standards. The transmitter has signal acquisition, zero drift and temperature compensation functions. This sensor is suitable for fields that need to measure soil moisture, such as meteorology, environment, agriculture, forestry, water conservancy, electricity, etc.
2. Features
High measurement accuracy, fast response and good interchangeability
With power reverse connection protection function
Epoxy resin casting, good sealing and corrosion resistance, can be buried in the soil for a long time
Small size design, easy to carry, easy installation, operation and maintenance.
Stainless steel probes guarantee longevity.
Reliable performance, less affected by soil salinity, suitable for various soil types
3. Technical parameters
⊙Accuracy: ±3%
⊙ Measuring range: 0-100%
⊙ Measurement stabilization time: 2 seconds
⊙Response time: <1 second
⊙Probe length: 5.5cm
⊙Probe diameter: 3mm
⊙Probe material: stainless steel
⊙ Circuit sealing: epoxy resin
⊙Working current: 25～35mA, typical value 28mA (voltage type)
⊙ Measurement frequency: 100MHz
⊙Measuring area: A cylinder with a diameter of 7cm and a height of 7cm surrounding the central probe with the central probe as the center
⊙ Lead length: 2.5 meters (can be customized)
★Voltage output type
Supply voltage: 7-24v DC
Output signal: 0.4-2v or 0-2v
Humidity value=(output voltage-0.4)/1.6*100-40 or output voltage/2*100-40
1. Introduction
The soil temperature sensor is a high-precision, high-sensitivity sensor for measuring soil temperature. Its working principle is to read the temperature value through a high-precision digital temperature chip. The transmitter has signal acquisition, zero drift and temperature compensation functions. This sensor is suitable for fields that need to measure soil temperature, such as meteorology, environment, agriculture, forestry, water conservancy, electricity, etc.
2. Features
High measurement accuracy, fast response and good interchangeability
Easy installation and simple operation
With power reverse connection protection function
Epoxy resin casting, corrosion resistance
3. Technical parameters
⊙Accuracy: ±0.2℃
⊙Measuring range: -40℃～60℃
⊙ Lead length: 2.5 meters (can be customized)
⊙ Circuit sealing: epoxy resin
⊙Stable time: 500ms after power-on
⊙Power consumption: normal 20mA, peak 50mA
★Voltage output type
Supply voltage: 7-24v DC
Output signal: 0.4-2v or 0-2v
Temperature value=(output voltage-0.4)/1.6*100-40 or output voltage/2*100-40
There are two ways to plug in the sensor:
1、Quick measurement method: Select a suitable measurement location, avoid stones, make sure that the steel needle will not touch hard objects such as stones, plan the topsoil according to the required measurement depth, and maintain the original tightness of the soil below. Hold the sensor body and insert it vertically into the soil. When inserting it, do not shake it back and forth, and make sure it is in close contact with the soil. In a small range of a measuring point, it is recommended to measure multiple times to obtain an average.
2、Buried measurement method: vertically dig a pit with a diameter of more than 20 cm, the depth is as required for the measurement, and then insert the sensor steel needle into the pit wall horizontally at a predetermined depth, and bury the pit and compact it to ensure close contact with the soil. After a period of stabilization, measurements and recordings can be made for days, months, or even longer.
This method is used for multi-layer soil moisture detection, and the humidity heads are arranged at a distance of 10cm to prevent mutual interference. Do not shake the sensor when inserting to prevent the sensor probe from being bent and damaging the steel needle.
Related products
-
CLEAN DO30 Dissolved Oxygen Meter
Features ●Boat-shaped floating design, IP67 waterproof grade. ●Easy operation with 4 keys, comfortable to hold, accurate value measurement with one hand. ●Selectable dissolved oxygen unit: concentration ppm or saturation %. ●Automatic temperature compensation, automatic compensation after salinity/atmospheric pressure input. ●User-replaceable electrode and membrane head kit (CS49303H1L) ●Can carry ou...
-
Portable combustible gas leak detector
Product Parameters ● Sensor Type: Catalytic sensor ● Detect gas: CH4/Natural gas/H2/ethyl alcohol ● Measure range: 0-100%lel or 0-10000ppm ● Alarm point: 25%lel or 2000ppm ,adjustable ● Accuracy: ≤5%F.S ● Alarm: Voice + vibration ● Language: Support English& Chinese menu switch ● Display: LCD digital display, Shell Material: ABS ● Working voltage: 3.7V ● Battery capacity: 2500mAh Lithium battery ●...
-
Single-point Wall-mounted Gas Alarm
Technical parameter ● Sensor: catalytic combustion ● Responding time: ≤40s (conventional type) ● Work pattern: continuous operation, high and low alarm point(could be set) ● Analog interface: 4-20mA signal output [option] ● Digital interface: RS485-bus interface [option] ● Display mode: Graphic LCD ● Alarming mode: Audible alarm -- above 90dB; Light alarm -- High intensity strobes ● Output control: re...
-
Composite portable gas detector
System Description System configuration 1. Table1 Material List of Composite portable gas detector Portable pump composite gas detector USB Charger Certification Instruction Please check materials immediately after unpacking. The Standard is necessary accessories. The Optional is can be choose according to your needs. If you have no need to calibration, set the alarm parameters, or rea...
-
WGZ-500B, 2B, 3B, 4000B Portable Turbidity Meter
Features ● Portable, AC and DC power supply, with low voltage indication and automatic shutdown function. The serial RS232 communication interface can be connected with a micro printer. ● Microcomputer low-power configuration, touch keyboard, LCD screen with backlight, can display date, time, measurement value and measurement unit at the same time. ● Measuring range can be manually selected or automa...
-
CLEAN PH30 pH Tester
Features ●Boat-shaped floating design, IP67 waterproof grade. ●4-button easy operation, comfortable to hold, accurate pH measurement with one hand. ●Wide application occasions: It can meet the measurement of 1ml trace samples in the laboratory to the water quality testing in the field. ●Can carry out throwing water quality measurement (automatic locking function) ●Flat electrodes can be used for skin...
