Externally attached ultrasonic level meter
External ultrasonic level meter measurement will be placed in the ultrasonic transducer measured container wall directly below (bottom), without opening, easy to install, does not affect the site production. Transducer external, truly non-contact measurement, suitable for a variety of closed containers toxic, volatile, flammable, explosive, strong pressure, strong corrosive and other liquid media level measurement. This product can realize the Internet of things through GPRS, Wifi.
★Safety: toxic, corrosive, pressure, flammable, volatile, easy to leak liquids, without contact with liquids and gases.
★Health: brewing, beverage, milk production, storage tanks, pipelines and other level detection, without contact with liquids and pollution.
★Installation, maintenance: installation and maintenance without fire, without clearing the tank, without affecting production.
★Backup and restore setup parameters
★With digital filtering and echo recognition function
★Set fixed interference filtering function
★Support Bluetooth, GPRS communication, GPS satellite positioning, etc.
★Support customized serial data format
★Support the customization of the main display interface
Range (optional): 1m, 3m, 5m, 8m, 10m, 15m, 20m, 25m, 30m
Accuracy: ±1mm-±0.3%FS (with the sensor, pressure and temperature instability may affect the accuracy)
Display: Chinese and English LCD, color screen TFT
Resolution: 1mm
Output (order selected)
Analog output: 4～20mA, 0～20mA, 0～5V, 0～10V
Digital output: RS485/Modbus, HART (2-wire)
Wireless transmission: GPRS, LORA, NB, RF, Bluetooth, Wifi, etc.
Switching output: three-way NPN/two-way relay (AC: 3A 250V DC: 5A 24V)
Power supply (order selected)
Voltage: DC 12-24V, AC220V
Physical characteristics (order selected)
Case material: cast aluminum Protection level: IP65
Probe material: ABS, 304 Protection grade: IP68
Mounting method: magnetic adsorption
Main body size: 148X178X68
Electrical interface: M20X1.5-2
Probe cable: 10M
Environmental performance (order selected)
Temperature of main unit: -20~60
Probe temperature: -40~70℃ (customizable)
Probe humidity: 15~ RH
Related products
-
CLEAN CON30 Conductivity Meter (Conductivity/TD...
Features ●Boat-shaped floating design, IP67 waterproof grade. ●Easy operation with 4 keys, comfortable to hold, accurate value measurement with one hand. ●Extra large measurement range: 0.0 μS/cm - 20.00 mS/cm; minimum reading: 0.1 μS/cm. ●Auto range 1-point calibration: free calibration is not limited. ●CS3930 Conductivity Electrode: Graphite electrode, K=1.0, accurate, stable and anti-interf...
-
Pressure (Level) Transmitters Liquid Level Sensor
Features ● No pressure hole, no cavity plane structure; ● A variety of signal output forms, voltage, current, frequency signals, etc.； ● High precision, high strength; ● Hygienic, anti-scaling Technical indicators Power supply: 24VDC Output signal: 4~20mA, 0~10mA, 0~20mA, 0~5V, 1~5V, 1~10k...
-
Single-point Wall-mounted Gas Alarm
Structure chart Technical parameter ● Sensor: electrochemistry, catalytic combustion, infrared, PID...... ● Responding time: ≤30s ● Display mode: High brightness red digital tube ● Alarming mode: Audible alarm -- above 90dB(10cm) Light alarm --Φ10 red light-emitting diodes (leds) ...
-
Rain sensor stainless steel outdoor hydrologica...
Technique Parameter Water-carrying caliber Ф200 ± 0.6mm Measuring range ≤4mm / min (precipitation intensity) Resolution 0.2mm (6.28ml) Accuracy ± 4% (indoor static test, rain intensity is 2mm / min) Power supply mode DC 5V DC 12V DC 24V Other Output form Current 4 ~ 20mA Switching signal: On-off of reed switch Voltage: 0～2.5V Voltage: 0～5V Voltage 1 ~ 5V Other ...
-
Fixed single gas transmitter LCD display (4-20m...
System Description System configuration Table 1 bill of materials for standard configuration of fixed single gas transmitter Standard configuration Serial number Name Remarks 1 Gas transmitter 2 Instruction manual 3 Certificate 4 Remote control Please check whether the accessories and materials are complete after unpacking. Standard configuration is a ne...
-
Single-point Wall-mounted Gas Alarm (Chlorine)
Technical parameter ● Sensor: catalytic combustion ● Responding time: ≤40s (conventional type) ● Work pattern: continuous operation, high and low alarm point(could be set) ● Analog interface: 4-20mA signal output[option] ● Digital interface: RS485-bus interface [option] ● Display mode: Graphic LCD ● Alarming mode: Audible alarm -- above 90dB; Light alarm -- High intensity strobes ● Output control: rel...
